C85D MANUAL POWDER COATING SYSTEM - DIRECT BOXFEED

Key Benefits:

• Features Eurotec's "TOTAL ENERGY CONTROL" (Patent Pending) unique charging system giving automatic control of both current and voltage.
• Proportional powder control, available as an optional extra, controls powder output in relation to distance to gun from object ensuring smooth powder laydown even with high powder build.

• Gives improved safety, efficiency of charging, minimum surface disruption and unrivalled recoatability.
• Colour changes in seconds - simply unclip the venturi, remove the suction tube and blow clean.
• Vibrating Chassis  - mounted at an angle in two planes so that powder is extracted from the lowest point ensuring maximum powder utilisation.
• High efficiency turbine vibrator activated only on triggering of gun to minimise powder compaction, fluidising kit included for difficult powders.
• Accepts all popular powder containers up to 30kg (66lbs).
• Controlled powder support arm simply lifts clear to a park position for fast box replacement when changing colours.
• Can be supplied as a single or double operator unit.
• Multi-Purpose Unit can be used to feed automatic powder guns and as a simple and efficient fresh powder transfer system either continually or on demand.

Key Benefits:

• Features Eurotec's "TOTAL ENERGY CONTROL" (Patent Pending) unique charging system giving automatic control of both current and voltage.
• Proportional powder control, available as an optional extra, controls powder output in relation to distance of gun from object ensuring smooth powder laydown even with high powder build.
• Gives improved safety, efficiency of charging, minimum surface disruption and unrivalled recoatability.
• Unit is robust, stable and easily transportable on large conductive castors.
• 25Kg (55lbs) Fluid bed simply lifts off the chassis base, cleaning could not be easier as the plenum and fluidising tile quickly detatch from the bed body.
• Can be supplied as a single or double operator unit.

The ultimate in portability, the Eurotec Ultra-Com 300 is designed for laboratory use, on site demonstrations and test sampling.  Only two services are required, a suitable air supply  and an electrical connection point.

Key Benefits/Features:

• Powder flow can be accurately controlled by the air pressure regulator on the face of the unit.   Additional control can also be achieved by use of the flow regulator on the side of the spray gun.
• MG300 Electrostatic Powder Gun comes complete with a flat nozzle giving excellent penetration.   The system incorporates "Total Energy Control" (Patent Pending), Eurotec's unique charging system giving automatic control of both current and voltage.
• Front loading cup assembly (85gms/3ozs capacity) complete with small and medium deflectors for coating refrence panels and instant colour changes.
• Side loading cup assembly (170gms/6ozs capacity) comes complete with small, medium and large deflectors, ideal for component trials.
• Blow down gun included to facilitate colour changes.
• LED Lights indicate power on and static on.
• Resettable circuit breakers.
• Adjustable electrical supply for world wide use.